3-72. WATER PUMP INLET HOSE REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
1.
Loosen two clamps (2) and remove water pump inlet hose (3) from water pump (1) and lower tube
assembly (4).
2.
Remove two clamps (2) from hose (3).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-280-24P
Equipment Condition
Cooling system drained (para. 3-60).
b. Installation
1.
Install two clamps (2) to hose (3).
2.
Install water pump inlet hose (3) on lower tube assembly (4) and water pump (1) with two clamps (2).
3.
Tighten clamps (2) to 40 lb-in. (5 N•m).
TM 9-2320-280-20-2
Change 2
3-127
FOLLOW-ON TASK: Fill cooling system (para. 3-60).
