TM 9-2320-280-20-2
3-63. RADIATOR SUPPORT REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-24P
automotive (Appendix B, Item 1)
Equipment Condition
Materials/Parts
Left splash shield removed (para. 10-17).
Three locknuts (Appendix G, Item 106)
Right splash shield removed (para. 10-20).
a. Removal
1. Remove locknut(1), washer (2), large washer (3), radiator support (4), and insulator (5) from radiator (6).
Discard locknut (1).
2. Remove two locknuts (10), washers (8), capscrews (7), and support (4) from airlift bracket (9).
Discard locknuts (10).
b. Installation
1. Install support (4) on airlift bracket (9) with two capscrews (7), washers (8), and locknuts (10).
2. Install insulator (5) and support (4) on radiator (6) with large washer (3), washer (2), and locknut (1),
Tighten locknut (1) to 26 lb-ft (35 Nom).
3. Tighten locknuts (10) to 26 lb-ft (35 N.m).
FOLLOW-ON TASKS: Install left splash shield (para. 10-17).
Install right splash shield (para. 10-20).
3-117
