3-54. RIGHT EXHAUST MANIFOLD REAR HEAT SHIELD REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Remove locknut (6), capscrew (2), and clamp (1) from rear heat shield (7) and transmission dipstick
tube (3). Discard locknut (6).
2.
Remove capscrew (5) and rear heat shield (7) from heat shield (4).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Locknut (Appendix G, Item 107.1)
Manual References
TM 9-2320-280-24P
Equipment Condition
Engine access cover removed (para. 10-15).
General Safety Instructions
Do not touch hot exhaust system components with
bare hands.
b. Installation
1.
Install rear heat shield (7) on heat shield (4) with capscrew (5).
2.
Install clamp (1) and rear heat shield (7) on transmission dipstick tube (3) with capscrew (2) and
locknut (6).
TM 9-2320-280-20-2
3-98
Change 2
WARNING
Do not touch hot exhaust system components with bare hands.
Severe injury will result.
