TM 9-2320-280-20-2
3-51. TAILPIPE HANGER REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1
Materials/Parts
Manual References
TM 9-2320-280-24P
General Safety Instructions
Do not touch hot exhaust system components with
Six locknuts (Appendix G, Item 106)
bare hands.
a. Removal
W A R N I NG
Do not touch hot exhaust system components with bare hands.
Severe injury will result.
1. Remove four locknuts (5), washers (4), capscrews (9), washers (4) two insulator reinforcement
plates (10) and insulator (8) from tailpipe hanger (6). Discard locknuts (5).
2. Remove two locknuts (1), washers (2), capscrews (7), washers (2) and tailpipe hanger (6) from
frame (3). Discard locknuts (1).
b. Installation
1. Install insulator (8) and insulator reinforcement plates (10) to tailpipe hanger (6) with four
washers (4), capscrews (9), washers (4), and locknuts (5).
2. Install tailpipe hanger (6) to frame (3) with two washers (2), capscrews (7), washers (2), and
locknuts (1). Tighten capscrews (7) to 26 lb-ft (35 Nom).
3-94
