TM 9-2320-280-20-2
3-45. HAND THROTTLE CONTROL CABLE AND BRACKET REPLACEMENT (Cont’d)
b. Installation
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Install nut (26), O-ring (33), lockwasher (32), and nut (25) on hand throttle cable (11).
Install handle (31) on hand throttle cable (11) with setscrew (30).
Install bracket (23) on instrument panel (3) with screw (24) and nut (22). Do not tighten.
Align holes in bracket (23), instrument panel (3), and steering column bracket (29) with washer (28),
capscrew (27), washer (28) and locknut (21).
Tighten screw (24) and nut (22).
Install hand throttle cable (11) on bracket (23) with nut (25).
Install bracket (12) on cowl (15) with two washers (14), capscrews (20), washers (14), and locknuts (13).
Install hand throttle cable (11) on bracket (12) with washer (9), screw (10), washer (9), and locknut (8).
Connect clevis (16) to accelerator rod (17) with washer (18) and hitch pin (19).
Connect speedometer cable (4) to speedometer (1), ensuring core (2) engages with square hole in
speedometer (1), and tighten nut (5).
Install instrument cluster (7) in instrument panel (3) with four screws (6).
3-85
