TM 1-4940-355-12&P
SHOP EQUIPMENT CONTACT MAINTENANCE (SECM)
SLIDER DOOR COMPONENT
INITIAL SETUP
Tools And Special Tools:
Personnel Required:
Tool Kit Acft. Maint., B01 (Table 2, WP 0025 00)
One MOS 67 Series or MOS 68 Series
Materials/Parts:
References:
100 Grit Paper, (Item 6, WP 0031 00)
TM 1-1500-204-23-10
Acetone, (Item 1, WP 0031 00)
Repair Parts and Special Tools List (WP 0027 00)
Permabond Cyanoacrylate (Superglue) Adhesive,
TM 43-0139
(Item 2, WP 0031 00)
Equipment Conditions:
MIL-P-23377, Primer (Item 8, WP 0031 00)
SECM Assembled (WP 0020 00)
MIL-C-22750, Number 34094 (Green 383) (Item 9,
Number 8802 extrudable sealant (Item 4, WP 0031
DISASSEMBLY
NOTE
Only disassemble as far as necessary to get to the part to be replaced.
1. Open tailgate, then open back doors of SECM.
2. Unlatch 2 slider door draw latches (1). (Figure 1)
3. Push upward (large arrow) on the back edge of slider door to disengage door (2) from latched position (3) to
sliding position (4).
4. Slide door open until bolts (5) align with open slots (6) in rail, then raise door off Main Box (7).
5
7
6
2
4
3
1
MS019468
Figure 1. Main Box Assembly Slider Door