Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd)
Cut aluminum sheet metal to size as shown.
Locate, mark, and drill two .313-.375-in. diameter holes in left splash shield access cover as shown.
Locate, mark, and drill one .406-.466-in. diameter hole in left splash shield access cover as shown.
Remove all burrs and sharp edges.
Paint left splash shield access cover as required. (Refer to TM 43-0139.)
Figure D-86. Left Splash Shield Access Cover.
10 X 12-FT SHEET.
0.08 IN. THICK
LEFT SPLASH SHIELD ACCESS COVER
CUT TO SIZE