TM 9-2330-392-14&P 2-8 Change 2 Table 2-1. Operator’s Preventive Maintenance Checks and Services for M1101, M1102, and Trailer Chassis - Continued Item No. Interval Location Procedure Not Fully Mission Capable If: Item To Check/ Service 15 Weekly Wheel Assemblies (Right) Check lugnuts and stud nuts to make sure that they are not loose or missing. If any are loose, tighten. Three or more lugnuts or stud nuts are missing. 16 Weekly Cargo Body a. Inspect   cargo   body   for   missing   rivets, missing  cargo  tiedowns,  and  damage  to the box. b. Inspect   tailgate   for   damage,   missing   or broken  hardware,  missing  or  broken  lan- yard  cable,  and  missing  or  damaged  pin. Check    that    tailgate    rotates    freely    on hinges. c. Inspect decontamination bracket for dam- aged or missing hardware. d. Visually   check   that   identification   plate and shipping plate are firmly attached and readable. e. Inspect bows for damage. 17 Weekly Soft Top Kit Visually  inspect  canvas  cover  for  rips,  tears, or missing footman loops. 18 Weekly Frame and Cross- member Inspect  frame  side  rails  for  cracks,  breaks, bends,   wear,   deterioration,   and   missing   or loose fasteners. Cracks, bends, or breaks in frame are present. 19 Monthly Brake Actuator Assembly Inspect   the   master   cylinder   assembly   for damaged  or  missing  cap,  leaks,  and  proper fluid   level.   If   cap   is   damaged   or   missing, replace  it.  Proper  fluid  level  is      1/8  in.  (3 mm)  below  top  edge  of  reservoir.  If  not  at specified level, add fluid (App G). Any leaks are found.