TM 9-2330-392-14&P
Change 2
2-7
Table 2-1. Operators Preventive Maintenance Checks and Services
for M1101, M1102, and Trailer Chassis - Continued
Item
No.
Interval
Location
Procedure
Not Fully Mission
Capable If:
Item To
Check/
Service
5
Before
Tires (Left)
Visually check for underinflated and unser-
viceable tires. Check tires for leaks, cuts,
gouges, cracks, and bulges. Remove all pen-
etrating objects.
Any tire is missing or unserviceable.
Tires have leaks, cuts, gouges, cracks,
or bulges which would result in tire
failure during operation.
6
Before
Tires (Right)
Visually check for underinflated and unser-
viceable tires. Check tires for leaks, cuts,
gouges, cracks, and bulges. Remove all pen-
etrating objects.
Any tire is missing or unserviceable.
Tires have leaks, cuts, gouges, cracks,
or bulges which would result in tire
failure during operation.
7
Before
Handbrake
Lever (Right)
Check handbrake lever for damage or miss-
ing parts. Check that the handle can be
engaged and released. Adjust as necessary
(para 2-14).
Damage is evident or handbrake fails
to operate correctly.
8
Before
Intervehicu-
lar Cable
Connect intervehicular cable to towing vehi-
cle (para 2-10). Operate towing vehicle light
switch through all settings and check trailer
lights.
Trailer lights do not operate properly.
9
After
Rear
Stabilizers
Inspect rear stabilizers for damage. Ensure
that hinge on flex plate can be rotated and
sections slide up and down when pin is
removed.
Damage is evident or parts are miss-
ing.
10
After
Shock
Absorber
Inspect shock absorbers for leaks, missing
nuts, and damage.
Any leaks are evident, mounting hard-
ware missing, damage is evident.
11
After
Safety
Chains
Inspect safety chains for damage or missing
parts.
Damage is evident or parts are miss-
ing.
12
Weekly
Wheel
Assemblies
(Left)
Check lugnuts and stud nuts to make sure
that they are not loose or missing. If any are
loose, tighten.
Three or more lugnuts or stud nuts are
missing.
13
Weekly
Brake Actua-
tor Assembly
Inspect brake lines and hoses for missing
clamps, cracks, leaks, loose connections, or
broken lines. Tighten loose connections.
Any leaks are found.
NOTE
Vehicle operation with damaged or inoperable trailer lights may violate AR 385-55.
14
Weekly
Lights,
Reflectors,
and Wiring
a.
Visually inspect lights and reflectors for
missing or broken parts and loose con-
nectors. If any connectors are loose,
tighten.
b. Inspect wiring harness and intervehicular
cable for exposed, frayed, or damaged
wiring or missing mounting hardware.