TM 9-2320-387-24-2
25-98
Change 1
25-35. A/C WIRING HARNESS AND CABLE MAINTENANCE (Contd)
17.
Remove screw (5), lockwasher (4), and washer (3) securing blower motor ground (8), A/C control
module ground (7), A/C wiring harness ground (6), and vehicle harness ground (1) to
heater/evaporator assembly (2). Discard lockwasher (4).
18.
Remove tiedown straps, as required, from wiring at heater/evaporator assembly (2).
19.
Disconnect two A/C wiring harness connectors (18) from thermostat jumper harness connectors (9).
20.
Disconnect two A/C wiring harness connectors (11) from circuit breaker (10).
21.
Disconnect A/C wiring harness connector (17) from A/C control module connector (16).
22.
Disconnect A/C wiring harness connector (14) from A/C control module connector (15).
23.
Disconnect A/C wiring harness connector (13) from blower motor connector (12).
24.
Disconnect A/C wiring harness connector (21) from clutch relay (19).
25.
Disconnect A/C wiring harness connector (22) from condenser fan relay (20).
26.
Disconnect A/C wiring harness connector (23) from rear blower relay (24).
1
2
6
7
8
3
4
5
