TM 9-2320-387-24-2
1 O-41. -DRIVER’S SEAT ASSEMBLY MAINTENANCE
This task covers:
a. Disassembly
b. Assembly
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Four lockwashers (Appendix G, Item 206)
Four lockwashers (Appendix G, Item 228)
Eight locknuts (Appendix G, Item 129)
Equipment Condition
Driver’s seat assembly removed (para. 10-40).
Maintenance Level
Unit
Manual References
TM 9-2320-387-24P
NOTE
Slide seat back and forth to gain access to slide set hardware.
a. Disassembly
1.
2.
3.
Remove four nuts (9), lockwashers (171, and seat (2) from absorber (21). Discard lockwashers (17).
Remove four locknuts (31, washers (41, capscrews (161, and absorber (21) from slide set (11). Discard
locknuts (3).
4.
5.
Remove four nuts (91, lockwashers (171, and seat (2) from riser (6). Discard lockwashers (17).
Remove four locknuts (31, washers (4), capscrews (161, riser (61, and tray (5) from slide set (11). Discard
locknuts (3).
6.
Remove two nuts (181, capscrews (201, loop (19), and strap (1) from riser (6).
7.
Inspect velcro strip (7) on riser (6) and replace if damaged.
Remove four locknuts (13), washers (121, socket-head screws (81, lockwashers (lo), height
adjuster (141, and cover (15) from slide set (11). Discard locknuts (13) and lockwashers (10).
NOTE
Perform steps 2 and 3 for Ml114 models only. Perform steps 4
through 7 for Ml113 models only.
b. Assembly
NOTE
Perform steps 1 through 3 for Ml113 models only. Perform steps 4
and 5 for Ml114 models only.
1.
Install strap (1) and loop (19) on riser (6) with two capscrews (20) and nuts (18).
2.
Install tray (5) and riser (6) on slide set (11) with four capscrews (161, washers (41, and locknuts (3).
3.
Install seat (2) on riser (6) with four lockwashers (17) and nuts (9).
4.
Install absorber (21) on slide set (11) with four capscrews (161, washers (41, and locknuts (3).
5.
Install seat (2) on absorber (21) with four lockwashers (17) and nuts (9).
6.
Install height adjuster (14) and cover (15) on slide set (11) with four lockwashers (lb), socket-head
screws (81, washers (121, and locknuts (13).
1 O-70
