TM 9-2320-387-24-2
Change 1
10-69
10-40. DRIVER'S SEAT ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
Manual References
TM 9-2320-387-24P
Maintenance Level
Unit
M1113
M1114
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Four lockwashers (Appendix G, Item 206)
Tape (Appendix C, Item 78)
1
2
3
4
5
6
7
6
7
2
3
5
1
1.
Spread cover (7) to allow access to socket-head screws (2).
NOTE
Perform step 2 for M1113 models only. Perform step 3 for M1114
models only.
2.
Remove four socket-head screws (2), lockwashers (3), cover (7), seat assembly (1), tape (4), and four
washers (5) from supports (6). Discard lockwashers (3).
3.
Remove four socket-head screws (2), lockwashers (3), washers (5), cover (7), and seat assembly (1)
from supports (6). Discard lockwashers (3).
NOTE
Perform step 1 for M1113 models only. Perform step 2 for M1114
models only.
1.
Install four washers (5), tape (4), cover (7), and seat assembly (1) on supports (6) with four lock-
washers (3) and socket-head screws (2).
2.
Install seat assembly (1) on supports (6) with four washers (5), lockwashers (3), and socket-head
screws (2). Tighten socket-head screws (2) to 140-170 lb-in. (15-19 N•m).
b. Installation
a. Removal
