6.
Remove two nuts (1) and washers (2) from stud (7) in turret support ring (9).
7.
Remove sleeve spacer (8), two resilient mounts (3), plates (4), stud (7), and shim(s) (5), if present, from
between turret support ring (9) and C-pillar support mount (6).
8.
Remove nut (20) and washer (21) from stud (22) on right cargo shell mount (14).
9.
Remove stud (22), sleeve spacer (23), two resilient mounts (13), plates (12), and bracket (11) from roof
mount (10) and C-pillar support mount (14).
10.
Remove socket-head screw (17) and cargo tiedown (18) from cargo shell support tube (25) and
wheelwell (19).
11.
Remove capscrew (16) and washer (15) from wheelwell (19) and support tube (25).
CAUTION
Do not lift cargo shell farther than limits specified in step 12.
Raising cargo shell too far may cause damage to C-pillar.
12.
Raise cargo shell (26) approximately 1 in. (2.5 cm) and, using a mallet, rap cargo shell support
tube (25) at point A to loosen cargo shell (26), taking care not to bend C-pillar (24). Remove cargo
shell (26) from wheelwell (19).
13.
Remove cargo shell seal (27) and inspect for damage. Replace if damaged.
14.
Remove adhesive tape from cargo shell (26). Discard tape.
TM 9-2320-387-24-2
25-18
Change 1
25-7. CARGO SHELL MAINTENANCE (Cont'd)
1
2
2
8
9
10
24
17
18
20
21
22
12
13
23
16
25
12
13
11
14
15
19
7
1
6
4
3
3
4
5
A
