TM 9-2320-387-24-2
i-
24- 10. LEFT ENGINE MOUNT BRACKET REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Six locknuts (Appendix G, Item 121)
Manual References
TM 9-2320-387-24P
Maintenance Level
Direct support
a. Removal
1.
Remove two capscrews (21, brake line clamp (11, and oil line clamp (3) from engine mount bracket (4).
2.
Remove two locknuts (7) and washers (6) from insulator (5) and engine mount bracket (4). Discard
locknuts (7).
CAUTION
Wood block must completely cover bottom of engine oil pan or
damage to oil pan may result.
3.
Support engine under engine oil pan (12) with wood block and jack.
4.
Remove four locknuts (111, washers (91, capscrews (81, washers (9), and engine mount bracket (4)
from frame rail (10). Discard locknuts (11).
(1
1.
Install engine mount bracket (4) on frame rail (10) with four washers (91, capscrews (S), washers (91,
and locknuts (11). Tighten locknuts (11) to 90 lb-ft (122 Nom).
2.
Remove support from engine oil pan (12).
3.
Install engine mount bracket (4) on insulator (5) with two washers (6) and locknuts (7). Tighten
locknuts (7) to 90 lb-ft (122 Nom).
4.
Install brake line clamp (1) and oil line clamp (3) on engine mount bracket (4) with two capscrews (2).
24-12
