TM 9-2320-387-24-2
24-9. RIGHT ENGINE MOUkT BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
TOOIS
General mechanic’s
tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Five locknuts (Appendix G, Item 121)
Manual References
TM 9-2320-387-24P
Equipment Condition
Engine right mount and insulator removed
(para. 15-3).
Maintenance Level
Direct support
1.
Remove two locknuts (lo), washers Cl), capscrews (21, and washers (1) from support bracket (8) and
engine mount bracket (5). Discard locknuts (10).
2.
Remove capscrew (3) and vent tube clamp (4) from engine mount bracket (5).
3.
Remove three locknuts (91, washers (7), capscrews (61, washers (71, support bracket W, and engine
mount bracket (5) from frame rail (11). Discard locknuts (9).
-1
1.
Install support bracket (8) and engine mount bracket (5) on frame rail (11) with three washers (71,
capscrews (61, washers (71, and locknuts (9).
2.
Secure support bracket (8) on engine mount bracket (5) with two washers Cl), capscrews (21,
washers (11, and locknuts (10). Tighten locknuts (10) and (9) to 90 lb-t%
(122 N-m).
3.
Install vent tube clamp (4) on engine mount bracket (5) with capscrew (3).
24-10
