TM9-2320-387-24-2
21-6. GEARED HUB REPAIR (Contd)
NOTE
Immediately install steering arm cover after application of sealer.
17.
18.
19.
20.
Apply sealing compound to seal (17) and install seal (17) on steering arm cover (16) with retaining
ring (18).
Install steering arm cover (16) on geared hub (7) with four washers (15) and capscrews (141. Tighten
capscrews (14) to 65 lb-ft (88 N-ml.
Apply anaerobic sealer to side cover (22) mating surface and position side cover (22)
on geared
hub (7).
Apply sealing compound to capscrews (20) and install side cover (22) on geared hub (7) with eight
washers (21) and capscrews (201. Tighten capscrews (20) to 8-13 lb-ft (11-18 Neml.
0 16
FOLLOW-ON TASKS: Install geared hub (para. 6-9).
21-17