TM 9-2320-387-24-2
20-4. TRANSFER CASE GUIDE CABLE REPLACEMENT
This task covers:
a. Removal
INITIAL SETUP:
b. Installation
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual Reference
TM 9-2320-387-24P
Materials/Parts
Lockwasher (Appendix G, Item 238)
Maintenance Level
Direct support
1.
Remove nut (91, washer (101, capscrew (151, and washer (14) from muffler mounting bracket (2) and
guide cable bracket (3).
2.
Remove nut (11) and guide cable bracket (3) from capscrew (13) on transfer case (1).
3.
Remove capscrew (41, lockwasher (51, washer (61, guide cable (8), and support bracket (7) from frame (12).
Discard lockwasher (5).
4.
Remove nut (19), washer (181, guide cable (8), and washer (18) from stud (17) on crossmember
support bracket (16).
b. Installation
1.
Install guide cable bracket (3) on capscrew (13) with nut (11). Tighten nut (11) to 16-18 lb-ft
(22-24 Nom).
2.
Install guide cable bracket (3) on mufner mounting bracket (2) with washer (141, capscrew (151,
washer (lo), and nut (9).
3.
Install guide cable (8) and support bracket (7) on frame (12) with washer (6), lockwasher (5), and
capscrew (4). Tighten capscrew (4) to 30 lb-R (41 Nom).
4.
Install washer (18) and guide cable (8) on stud (17) and crossmember support bracket (16) with
washer (18) and nut (19). Tighten nut (19) to 60 lb-R (81 Nom).
20-8
