TM 9-2320-387-24-2
19-5. TRANSMISSION
PREPARATION
1
This task covers:
a. Disassembly
b. Assembly
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Special Tool
‘Ibrque adapter, 9/1&n. (Appendix B, Item 133)
Manual References
TM 9-2320-387-24P
Equipment Condition
Transmission/transfer case assembly removed
(para. 19-3).
Materials/Parts
Six locknuts (Appendix G, Item 172)
Anaerobic gasket sealing compound
(Appendix C, Item 58)
Maintenance Level
Direct support
a. Disassembly
1.
Disconnect two transmission/transfer case cooler lines (5) from transmission (3).
2.
Disconnect transmission/transfer case vent line (2) from transmission vent tube (4).
3.
Remove six locknuts (1) and transmission (3) from transfer case adapter (7). Discard locknuts (1).
4.
Separate transmission (3) from transfer case adapter (7).
II
1.
Clean old sealer from transfer case adapter (7) and transmission mounting surface (6).
2.
Apply anaerobic gasket sealing compound to transmission mounting surface (s).
3.
Install transmission (3) on transfer case adapter (7) with six locknuts (1). Using torque adapter,
tighten locknuts (1) to 26 lb-R (35 Nom).
4.
Connect transmission/transfer vent line (2) to transmission vent tube (4).
5.
Connect transmission/transfer case cooler lines (5) to transmission (3).
19-14
