16-6. FUEL INJECTION PUMP MAINTENANCE (Cont'd)
TM 9-2320-387-24-2
Change 1
16-11
FOLLOW-ON TASKS: • Install TP sensor (para. 4-46).
• Install fan cut-off switch (para. 4-42).
• Bleed fuel system (para. 16-4).
• Start engine (TM 9-2320-387-10) and check for fuel leaks.
• Time injector pump (para. 15-23).
6.
Install hose adapter (17) on fuel injection pump (4).
7.
Install accelerator cable mounting bracket (para. 16-10).
8.
Connect throttle return spring (15) to throttle shaft lever (16).
9.
Connect fuel filter outlet hose (19) to hose adapter (17) and tighten clamp (18).
10.
Install engine oil filler tube (para. 3-3).
11.
Install fuel injection lines (para. 16-4), but do not bleed air from lines.
12.
Adjust accelerator linkage (para. 3-43).
CAUTION
Do not operate starter continuously for more than 20 seconds;
wait 10 to 15 seconds between periods of operation. Failure to do
so may result in damage to the starter.
13.
Crank engine until fuel exits from check valve (13) on fuel injection pump (4).
14.
Connect fuel drainback hose (10) to check valve (13) with clamp (11).
15.
Connect leads 54A (12) and 569B (14) to fuel injection pump (4).
