3.
Remove three capscrews (18) from windshield bracket (15) and left capping ring (12).
4.
Remove two locknuts (20), lockwashers (19), socket-head screws (16), and windshield bracket (15)
from body (3). Discard locknuts (20) and lockwashers (19).
5.
Remove five capscrews (21) and upper capping ring (22) from windshield frame (11).
6.
Remove two capscrews (17), capscrews (14), washers (13), and left capping ring (12) from windshield
frame (11).
7.
Remove two capscrews (9) and center capping ring (10) from windshield frame (11).
8.
Remove windshield glass (25) from windshield frame (11).
9.
Remove neoprene weatherstrips (23) and (24) from windshield glass (25).
10.
Remove gasket (26) from windshield glass (25).
Refer to para. 10-56 for plusnut (2) inspection and replacement.
1.
Apply a thin coat of windshield sealing compound to side and bottom of windshield glass (25).
2.
Install neoprene weatherstrips (23) and (24) on sides and bottom of windshield glass (25).
3.
Install gasket (26) on windshield glass (25).
4.
Install windshield glass (25) on windshield frame (11).
5.
Apply sealing compound to threads of two capscrews (9), and install center capping ring (10) on
windshield frame (11) with capscrews (9). Tighten capscrews (9) to 68-82 lb-in. (8-9 N•m).
6.
Apply sealing compound to threads of five capscrews (21), and install upper capping ring (22) on
windshield frame (11) with capscrews (21). Tighten capscrews (21) to 68-82 lb-in. (8-9 N•m).
7.
Apply sealing compound to threads of two capscrews (14) and (17), and install left capping ring (12)
on windshield frame (11) with two washers (13), capscrews (14), and capscrews (17). Tighten
capscrews (17) to 68-82 lb-in. (8-9 N•m).
8.
Apply sealing compound to threads of three caspcrews (18), and install windshield bracket (15) on
left capping ring (12) with capscrews (18). Tighten capscrews (18) to 40-60 lb-in. (5-7 N•m).
9.
Install windshield bracket (15) on body (3) with two socket-head screws (16), lockwashers (19), and
locknuts (20). Tighten socket-head screws (16) to 40-60 lb-in. (5-7 N•m).
10.
Apply sealing compound to threads of two capscrews (8) and capscrew (5), and install left deflector
(4) on body (3) and windshield (1) with two capscrews (8) and capscrew (5). Tighten capscrews (8)
and (5) to 68-82 lb-in. (8-9 N•m).
11.
Apply sealing compound to threads of screw (6), and install clamp (7) on left deflector (4) with
screw (6). Tighten screw (6) to 33-37 lb-in. (3.7-4.2 N•m).
c. Installation
b. Inspection
TM 9-2320-387-24-2
10-50
Change 1
10-27. WINDSHIELD GLASS MAINTENANCE (M1114) (Cont’d)
