TM 9-2320-387-24-2
1526.
ENGINE REMOVAL (Cont’d)
90.
91.
92.
93.
94.
95.
96.
Loosen hose clamps (14) and (18) and disconnect control valve hose (11) from control valve (15) and
hydro-booster hose (17) from hydra-booster (19).
Remove nut (161, washer (201, and capscrew (2) from two clamps (1).
Disconnect high-pressure line (21) from hydro-booster (19).
Remove nut (lo), screw (6), clamp (9), and body harness (8) from dipstick support bracket (7).
Disconnect two leads 458A (4) from leads 458C (3) and 458D (5).
Disconnect body harness leads 350B/359N355A (12) from engine harness leads 349A (13).
Disconnect harness lead 33B (25) from engine temperature sending unit (24) and harness lead (27)
from engine rpm sensor lead (26).
97.
Disconnect harness leads 458A and 458B (23) from water temperature sending unit (22).
