TM 9-2320-387-24-2
I
~~~
15-26. ENGINE REMOVAL (Cont’d)
1
84.
85.
86.
87.
88.
89.
Loosen clamps (36) and (37) and disconnect fuel inlet line (38) and fuel outlet line (39) from fuel
filter (35).
Remove nut and lockwasher assembly (401, engine harness ground 3C (411, and body harness ground
58B (42) from body (24). Discard nut and lockwasher assembly (40).
NOTE
Perform steps 86 through 88 for Ml113 models only.
Disconnect engine harness connector (29) from time-delay module (32).
Disconnect engine harness connector plug (30) from protective control box (31).
Remove nut (33), capscrew (271, clamp (281, and engine harness (26) from A-beam (25).
Remove two screws (34), clamp (231, and engine harness (26) from body (24).
15-67
