TM 9-2320-387-24-2
I 15-26. ENGINE REMOVAL (Cont’d)
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
Loosen clamp (1) and disconnect radiator inlet hose (2) from engine (14).
Loosen clamp (5) and disconnect surge tank-to-radiator vent hose (4) from adapter (6).
Loosen clamp (16) and disconnect control valve hose (15) from bulkhead adapter (17).
Disconnect fan drive hose quick-disconnect (18) from fan drive (19).
Loosen clamp (9) and disconnect lower radiator front hose (10) from radiator (3).
Remove locknut (35), washer (361, capscrew (411, washer (401, large washer (39), and lower
mount (37) from frame bracket (38) and radiator (3). Discard locknut(35).
Remove four locknuts (111, washers (12), capscrews (131, and two brackets (8) from airlift left and
right brackets (7) and (26). Discard locknuts (11).
WARNING
Do not drain engine oil when engine is hot. Severe injury to
personnel may result.
CAUTION
Cover or plug all hoses and connections immediately after
disconnection to prevent contamination. Remove all plugs prior to
connection.
NOTE
Have drainage container ready to catch oil.
Disconnect engine oil cooler suppiy and return lines (29) from engine, transmission, and power
steering oil cooler ports (30).
Loosen two clamps (28) and disconnect power steering hoses (27) from engine, transmission, and
power steering oil cooler ports (31).
Loosen two hose clamps (32) and disconnect transmission oil cooler line connector hoses (33) from
transmission oil cooler ports (21).
Loosen nut (25) and release tension from crossbrace (24).
Remove four locknuts (231, washers (22), capscrews (201, and crossbrace (24) from airlift
brackets (26) and (7). Discard locknuts (23).
Lift up radiator (3) and engine, transmission, and power steering oil cooler assembly (34) and remove
from vehicle.
15-56
