TM 9-2320-387-24-2
15-l 5. OIL PUMP MAINTENANCE
This task covers:
a. Removal
b. Inspection
c. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-387-24P
Equipment Condition
Oil pan removed (para. 3-6).
Maintenance
Level
Direct support
p7izz--1
1. Remove nut (6) from pickup tube bracket (4) and stud (7).
2.
Loosen capscrew (3) from bracket (4) and oil pickup tube (5) and slide bracket (4) off stud (7).
3.
Remove stud (7) from oil pump (8) and rear main bearing cap (2).
4.
Remove oil pump (8) and shaft (9) from cylinder block (1).
5.
Remove capscrew (3) and bracket (4) from oil pickup tube (5).
vb.Inspection
Inspect shaft (9) for damage. Replace oil pump (8) if damaged.
c. Installation
1.
Install bracket (4) on oil pickup tube (5) with capscrew (3). Finger-tighten capscrew (3).
2.
Install oil pump (8) and shaft (9) on cylinder block (1).
3.
Install stud (7) on oil pump (8) and rear main bearing cap (2) and tighten to 59-74 Ib-ft (80-100 Nom).
4.
Install bracket (4) on stud (7) with nut (6). Tighten nut (6) to 35 lb-R (47 N-m>.
5.
Tighten capscrew (3) to 12 lb-ft (16 N-m).
1 S-30
