TM 9-2320-387-24-2
I
15-7. TORSIONAL DAMPER REPLACEMENT
I
I
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 11
Materials/Parts
Lubricating oil (Appendix C, Item 44)
Sealing compound (Appendix C, Item 69)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment
Condition
l Hood raised and secured (TM 9-2320-387-10).
l Crankshaft pulley removed (para. E-6).
General Safety Instruckions
Torsional
damper must be supported
during
removal
and installation.
Maintenance
Level
Direct support
WARNING
Torsional damper must be supported during removal and installation.
Failure to do this may cause injury to personnel or damage to equipment.
1.
Remove capscrew (6) and washer (5) connecting torsional damper (1) to crankshaft (4).
2.
Reinstall capscrew (6) and loosen torsional damper (1) from crankshaft (4) with puller.
3.
Remove capscrew (6) and torsional damper (1) from crankshaft (4).
4.
Inspect woodruff key (2) and front cover seal (3) for damage. Replace woodruff key (2) or front
cover seal (3) (para. E-10) if damaged.
1515
