15-5. RIGHT CYLINDER HEAD REPLACEMENT (Cont'd)
3.
Install cylinder head (1) on cylinder block (5) with seventeen capscrews (3). Tighten capscrews (3)
to 20 lb-ft (27 N•m) following torque sequence.
4.
Tighten seventeen capscrews (3) to 55 lb-ft (75 N•m) following torque sequence.
5.
Retighten seventeen capscrews (3) to 55 lb-ft (75 N•m), following torque sequence shown.
6.
Tighten seventeen capscrews (3) an additional 90° following torque sequence and mark capscrews (3).
7.
Install cold-advance switch (2) on cylinder head (1).
FOLLOW-ON TASKS: • Install fuel injection return hoses (para. 3-37).
• Install rocker arm shafts and pushrods (para. 15-8).
• Install right intake manifold (para. 15-17).
• Install right exhaust manifold (para. 3-57).
• Install water crossover (para. 3-79).
• Install glow plugs (para. 3-39).
• Install fuel injection nozzles (para. 16-3).
TORQUE SEQUENCE
TM 9-2320-387-24-2
Change 1 15-13
1
2
3
4
5
4
6
1
