TM 9-2320-387-24-2
12-68.8
Change 1
12-36.4. 10,500 LB REAR HYDRAULIC WINCH HOSE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanics tool kit: automotive
(Appendix B, Item 1)
Materials/ Parts
Dexron III® (Appendix C, Item 37)
Two O-rings (Appendix G, Item 86.1)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
• Hood raised and secured
(TM 9-2320-387-10).
• Engine left splash shield removed
(para. 10-23).
• Battery ground cables disconnected
(para. 4-68).
Maintenance Level
Unit
CAUTION
Cover or plug all open hoses and connections immediately after
disconnection to prevent contamination. Remove all plugs prior
to connecting hoses.
NOTE
Ensure area around valve assembly ports and power steering
gear ports are clean before removing hoses.
1.
Disconnect hydraulic hose assembly (1) from port 1 elbow (2) on valve assembly (3).
2.
Disconnect hydraulic hose assembly (1) and O-ring (8) from power steering gear port (9).
Discard O-ring (8).
3.
Disconnect hydraulic hose assembly (5) from port 3 elbow (4) on valve assembly (3).
4.
Disconnect hydraulic hose assembly (5) and O-ring (6) from hydro-boost (7). Discard O-ring (6).
a. Removal
