TM 9-2320-387-24-2
12-68.6
Change 1
12-36.3. 10,500 LB REAR HYDRAULIC WINCH FAIRLEAD ROLLER BRACKET ASSEMBLY
REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanics tool kit: automotive
(Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/ Parts
Four lockwashers (Appendix G, Item 190)
Equipment Condition
Parking brake applied (TM 9-2320-387-10)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
General Safety Instructions
Support winch assembly during fairlead
bracket replacement.
Maintenance Level
Unit
WARNING
Winch assembly must be supported during fairlead bracket
removal and installation. Failure to support winch assembly may
result in injury to personnel or damage to equipment.
1.
Remove four retaining rings (12), two shafts (13), and rollers (14) from fairlead bracket (10).
2.
Remove four retaining rings (1), two shafts (2), and rollers (3) from fairlead bracket (10).
3.
Remove two capscrews (9), lockwashers (8), and fairlead bracket (10) from winch and bumper
assembly (6). Discard lockwashers (8).
NOTE
If reinforcement plate is damaged, perform step 4.
4.
Remove two capscrews (4), lockwashers (5), and reinforcement plate (7) from winch and bumper
assembly (6). Discard lockwashers (5).
NOTE
If replacing reinforcement plate, perform step 1.
1.
Install reinforcement plate (7) on winch and bumper assembly (6) with two lockwashers (5) and
capscrews (4). Tighten capscrews (4) to 37 lb-ft (50 N•m).
2.
Install fairlead bracket (10) on reinforcement plate (7) and winch and bumper assembly (6) with
two lockwashers (8) and capscrews (9). Tighten capscrews (9) to 37 lb-ft (50 N•m).
3.
Route winch cable (11) through slot in winch and bumper assembly (6), reinforcement plate (7),
and fairlead bracket (10).
4.
Install two rollers (3) and shafts (2) in fairlead bracket (10) with four retaining rings (1).
5.
Install two rollers (14) and shafts (13) in fairlead bracket (10) with four retaining rings (12).
b. Installation
a. Removal
