TM 9-2320-387-24-2
12-35.
REAR FAIRLEAD ROLLER BRACKET ASSEMBLY REPLACEMENT
This task covers:
a. Removal
INITIAL SETUP:
b. Installation
Applicable Models
Ml114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts
(Appendix
G, Item 130)
Manual References
TM 9-2320-387-24P
General Safety Instructions
Wear leather gloves when handling winch cable,
Maintenance Level
Unit
WARNING
Gloves must be worn when handling winch cable. Failure to
do so may cause severe injury to personnel.
I a. Removal
I
1.
Remove four retaining rings (61, two shafts (51, and rollers (4) from bracket (10).
2.
Remove four retaining rings (71, two shafts (91, and rollers (8) from bracket (10).
3.
Remove two locknuts (111, washers (21, capscrews Cl), washers (2), and bracket (10) from frame (3).
Discard locknuts (11).
rYzzzz-1
1.
2.
Install two rollers (8) and shafts (9) on bracket (10) with four retaining rings (7).
3.
Install two rollers (4) and shafts (5) on bracket (10) with four retaining rings (6).
Install bracket (10) on frame (3) with two washers (21, capscrews (11, washers (21,
Tighten locknuts (11) to 35 lb-ft (47 N-m).
and locknuts (111,
12-67
