TM 9-2320-387-24-2
I
12-24.
REAR ANTENNA CABLES REPLACEMENT
1.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two tiedown straps (Appendix G, Item 462)
Eleven nut and lockwasher assemblies
(Appendix G, Item 245)
Three locknuts (Appendix G, Item 156)
Two lockwashers (Appendix G, Item 217)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
l Battery ground cables disconnected (para. 4-68).
l Right rear passenger seat back removed (Ml114
only) (para. 10-45).
l Cargo shell door raised (TM 9-2320-387-10).
l Right rear underbody armor removed (Ml114 only)
(para 11-39).
Maintenance Level
Unit
NOTE
Replacement procedures for left and right rear antenna cables are
replaced basically the same, except the left antenna cables have an
additional six clamps securing cables across rear of vehicle. This
procedure covers the right rear antenna cables.
5.
6.
7.
Remove two tiedown straps (6) from antenna cables (4). Discard tiedown straps (6).
Remove two nut and lockwasher assemblies (51, screws (21, clamps (31, and antenna cables (4) from
front radio rack (1). Discard nut and lockwasher assemblies (5).
Remove nut and lockwasher assembly (111, capscrew (8), and clamp (9) from two antenna cables (4)
and grommet (10). Discard nut and lockwasher assembly (11).
Remove two screws (12) and insulation retainer (13) from cargo floor (7) and pull insulation
retainer (13) away from cargo floor (7).
Remove three capscrews (19), clamps (201, and two antenna cables (4) from body (18).
Remove nut and lockwasher assembly (21), screw (171, and clamp (22) from two antenna cables (4)
and body (18). Discard nut and lockwasher assembly (21).
Remove two nut and lockwasher assemblies (141, capscrews (231, antenna cables (41, grommet (161,
and retainer (15) from body (18). Discard nut and lockwasher assemblies (14).
.
.
12-40
