TM 9-2320-387-24-2
t 12-22. REAR ANTENNA MOUNTING BRACKET REPLACEMENT
I
Thii task covers:
a. Removal
INITIAL SETUP:
b. Installation
Applicable Models
Ml113
TOOIS
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Special Tools
Manual References
TM 9-2320-387-24P
Equipment Condition
l AS 1729/VRC antenna removed (para. 12-211,
if installed.
l AB-652/GR antenna removed (para. 12-231,
if installed.
Crowfoot, 3/B-in. (Appendix B, Item 142)
Socket adapter, 3/8-in. (Appendix B, Item 135)
M:ztenance Leve’
Materials/Parts
Three locknuts
(Appendix G, Item 179)
1 a. Removal
1
1. Remove grommet (3) from body (1).
NOTE
Note position of washers and clamp for installation.
2.
Remove three locknuts (B), washers (7), capscrews (41, washers (51, antenna mounting bracket (21,
and clamp (6) from body (1). Discard ~OC~IU~S
(8).
b. Installation
1.
Install antenna mounting bracket (2) and clamp (6) on body (1) with three washers (51,
capscrews (4), washers (71, and locknuts (8). Using crowfoot, tighten locknuts (8) to 15 lb-ft (20 Nem).
-2.
Install grommet (3) on body (1).
FOLLOW-ON TASKS: l Install AS 1729NRC antenna (para. 12-211, if removed.
l Install AB-652/GR antenna (para. 12-23), if removed.
12-38
