10-69. DRIVER’S REARVIEW MIRROR BRACKET MAINTENANCE
This task covers:
a.
Removal
b. Installation
a.1. Inspection
Remove capscrew (3), washer (4), capscrew (6), washer (5), and bracket (2) from A-pillar armor (1) and
firewall armor (7).
For plusnut inspection and replacement, refer to para. 10-56.
Apply sealing compound to threads of capscrews (3) and (6), and install bracket (2) on firewall armor (7)
and A-pillar armor (1) with washer (4), capscrew (3), washer (5), and capscrew (6). Tighten capscrew (3)
to 21 lb-ft (29 N•m) and capscrew (6) to 68-75 lb-in. (8-9 N•m).
b. Installation
a.1. Inspection
a. Removal
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealing compound (Appendix C, Item 72.1)
Manual References
TM 9-2320-387-24P
Equipment Condition
Rearview mirror removed (para. 10-68).
Maintenance Level
Unit
TM 9-2320-387-24-2
10-120
Change 1
FOLLOW-ON TASK: Install rearview mirror (para. 10-68).
7
2
3
4
5
1
6
