10-68. REARVIEW MIRROR MAINTENANCE
NOTE
Perform step 1 for M1113 models only. Perform step 2 for M1114
models only.
1.
Remove two capscrews (3), lockwashers (4), washers (5), and mirror assembly (2) from windshield
frame (7) and body (6). Discard lockwashers (4).
2.
Remove two locknuts (9), capscrews (3), and mirror assembly (2) from windshield frame (7) and
rearview mirror brackets (8). Discard locknuts (9).
NOTE
For inspection and removal of insertnut, refer to para. 10-56.
Inspect insertnut (1). Replace if damaged.
b. Inspection
This task covers:
a. Removal
d. Assembly
b. Inspection
e.
Installation
c.
Disassembly
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Four lockwashers (Appendix G, Item 206)
Seven locknuts (Appendix G, Item 156)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Maintenance Level
Unit
NOTE
Replacement procedures for left and right rearview mirrors are
basically the same. This procedure covers the left rearview mirror.
a. Removal
TM 9-2320-387-24-2
10-116
Change 1
