10-65. WINDSHIELD WASHER HOSES REPLACEMENT
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealing compound (Appendix C, Item 72.1)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Hood raised and secured (TM 9-2320-387-10).
Maintenance Level
Unit
This task covers:
a. Removal
b. Installation
1.
Remove nut (18), washer (4), capscrew (5), washer (4), clamp (3), and washer hose (1) from body
(14).
2.
Remove two nuts (12), washers (11), capscrews (16), washers (11), clamps (10), and washer hose
(13) from body (14).
3.
Disconnect washer hose (13) from pump (15) and tee (6), and remove through clamps (17).
NOTE
Perform steps 4 and 5 for M1114 models only. Perform steps 6
and 7 for M1113 models only.
4.
Remove two screws (19), clamps (21), and nozzles (20) from body (14).
5.
Remove washer hoses (1) and (8) from nozzles (20).
6.
Remove clamp (7) and washer hose (8) from tee (6) and nozzle (9).
7.
Remove clamp (7) and washer hose (1) from tee (6) and nozzle (2).
8.
Remove washer hoses (8) and (1) through clamps (17).
NOTE
Perform steps 1 and 2 for M1113 models only. Perform steps 3
and 4 for M1114 models only.
1.
Install washer hose (1) through clamps (17) and connect to nozzle (2) and tee (6).
2.
Install washer hose (8) through clamps (17) and connect to nozzle (9) and tee (6).
3.
Install two nozzles (20) on washer hoses (1) and (8).
4.
Apply sealing compound to screws (19) and install washer hoses (1) and (8) and two nozzles (20)
on body (14) with two clamps (21) and screws (19). Tighten screws (19) to 35 lb-in (4 N•m).
5.
Install washer hose (13) through clamps (17) and connect to tee (6) and pump (15).
NOTE
When installing clamps, ensure they are positioned below hood
rest, so hood does not interfere with clamps or hose when lowered.
6.
Install clamp (3) on washer hose (1) and body (14) with washer (4), capscrew (5), washer (4), and
nut (18).
7.
Install two clamps (10) on washer hose (13) and body (14) with two washers (11), capscrews (16),
washers (11), and nuts (12).
b. Installation
a. Removal
TM 9-2320-387-24-2
10-110
Change 1
