33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d)
TM 9-2320-387-24-2
33-58
Change 1
1.
Position metal strip E (2), with arrow facing up and toward metal strip C (4), on insert
panel (1). Align reference lines (3).
2.
Using metal strip E (2) as a template, locate, mark, and drill seven 0.187-in. (4.75-mm) diameter
holes through insert panel (1). Remove metal strip E (2).
3.
Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert
panel (1) and metal strip E (2).
4.
Position metal strip E (2) on insert panel (1) and install with seven rivets (5).
5.
Remove any adhesive residue and clean edges on metal strip E (2) and insert panel (1).
i. Metal Strip E and Insert Panel Assembly
DRILL SEVEN 0.187-IN. (4.75-MM)
DIAMETER HOLES
