TM 9-2320-387-24-2
Change 1
33-19
33-11. LEFT FRONT FLOOR PANEL REPAIR
This task covers:
a. Left Front Insert Panel Fabrication
f. Metal Strip D and Insert Panel Assembly
b. Metal Strips Fabrication
g. Metal Strip B and Insert Panel Assembly
c. Left Front Floor Panel Removal
h. Left Front Floor Panel and Insert Panel Drilling
d. Metal Strip A and Insert Panel Assembly
i. Insert Panel and Left Front Floor Panel Installation
e. Metal Strip C and Insert Panel Assembly
NOTE
All dimensions are in inches. For metric conversion, see chart.
1.
Cut insert panel (1) from sheet metal as shown and mark four reference lines (2) and directional
arrow (3) on insert panel (1).
a. Left Front Insert Panel Fabrication
METRIC CONVERSION
1.25 IN.
31.75 MM
16.50 IN.
419.10 MM
33.00 IN.
838.20 MM
INITIAL SETUP:
Applicable Models
M1113
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Riveter tool kit (Appendix B, Item 123)
Shop equipment, automotive maintenance
and repair: field maintenance, wheeled
vehicles, Post, Camp and Station, set A
(Appendix B, Item 10)
Manual References
TM 9-2320-387-24P
TM 43-0139
Materials/Parts
Eighty-eight rivets (Appendix G, Item 335)
Twenty rivets (Appendix G, Item 347.2)
Sheet metal (Appendix G, Item 439.1)
Adhesive (Appendix C, Item 2.1)
Adhesive sealant (Appendix C, Item 7.1)
Equipment Condition
• Fire extinguisher mount bracket removed
(para. 10-53).
• Driver’s seat assembly removed
(para. 10-40).
• Left floor insulation removed (para 10-31).
Maintenance Level
General Support
