TM 9-2320-387-24-2
27-3. BODY WIRING HARNESS REPLACEMENT (Cont'd)
27-38
Change 1
80.
Connect harness leads 25A (10) and 26A (1) to horn (2).
80.1. Install conduit (6.1) and (6.2) on harness (4) if removed.
81.
Install harness (4) on crossmember (7) with clamp (9) and screw (8).
82.
Install harness (4) on left airlift bracket (3) with three clamps (6) and screws (5).
83.
Connect harness leads 17E, 18C, and 91D (18) on headlight (20).
84.
Install harness (15) on headlight housing (19) with three clamps (14), screws (13), and nuts (29).
85.
Install harness connector (12) on plate (26) with four screws (25) and nuts (22).
86.
Install plate (26) on headlight housing (19) with screw (16), clamp (17), nut (27), screw (21), and
locknut (23).
87.
Install plate (26) on bracket (28) with four screws (24).
88.
Connect hood harness connector (11) to harness connector (12).
89.
Repeat steps 84 through 88 for opposite side.
1
10
2
3
4
5
6
7
6.1
6.2
8
9
