TM 9-2320-387-24-l
LUBRICATION
TABLE
USAGE
FLUID/LUBRICANT
CAPACITIES
EXPECTED
TEMPERATURE
ibove +15F (-9°C)
~40 to -15°F (+4 to -26°C
~40 to 65°F (+4 to -54°C)
Engine Oil
(MILL-21041
(MILL-461671
Crankcase:
w/o filter 7 qt (6.6 L)
w/filter 8 qt (7.6 Ll
Dry System 10 qt (9.5 L)
(inc. oil cooler)
X/I-ID0 30*
XYHDO lo***
1EA**
Engine
Coolant
Ethylene Glycol
and Water
I./4 Ethylene GlycoY
314 Water
Z/5 Ethylene GlycoY
315 Water
I/5 Ethylene GlycoV
2f5 Water
Radiator: 5 qt (4.7 L)
Complete System: 26 qt (24.6 L)
t15F (-9°C) and above
t40 to -15°F (+4 to -26°C
t40 to -65°F (+4 to -54°C
Brake System
Fluid Silicone BFS
Master Cylinder:
1.12 pt (0.53 L)
Complete System:
1.63 pt (0.78 L)
Ml Temperatures
Transmission
Dexrone III
3EA
Dry: 13.5 qt (12.8 L)
Drain & Refill 7.7 qt (7.3 L)
All Temperatures
Transfer
Case
DexronQ III
3.35 qt (3.17 L)
All Temperatures
All Temperatures
All Temperatures
All Temperatures
Steering System
DexronQ III
1 qt (0.95 L)
w/ cooler 1.25 qt (1.18 L)
1 pt ea ( 0.47 L)
Geared Hub (4)
Multipurpose Gear
Go 80/90
Axles (2)
Multipurpose Gear
GO 80190
2 qt ea (1.9 L)
Ball Joints,
Tie Rod Ends,
Pitman Arm,
Idler Arm,
Propeller ShaRs,
etc.
GAL4
As Required
All Temperatures
Hinges, Cables,
and Linkages
As Required
All Temperatures
olvHDo
*OE/HDO 15/40 (Grade 15W-40) lubricant may be used when expected temperatures are above +5F (-15°C).
**If OEA lubricant is required to meet the temperature ranges listed in the table, then the OEA lubricant is
to be used in place of OE/HDO 10 lubricant for all temperature ranges.
***If operating conditions are severe or abnormal, service chassis lubrication points at 1,000 mi. (1,600 km).
2-29
