TM 9-2320-387-24-l
-75. BAnERY TRAY MAINTENANCE
I
This task covers:
a. Removal
b. Cleaning’and Inspection
INITIAL SETUP:
c
Preventive Modification
d. Installation
Tools
?&era1
mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Manual References
TM 9-6140-200-14
TM 9-2320-387-24P
Equipment Condition
Batteries removed (para. 4-74).
Materials/Parts
Four locknuts (Appendix G, Item 109)
Sodium bicarbonate (Appendix C, Item 76)
Maintenance Level
Unit
a. Removal
Remove four locknuts (61, washers (2>, capscrews (11, washers (21, and battery tray (3) from battery box (5).
Discard locknuts (6).
b. Cleaning and Inspection
NOTE
For additional information on battery box tray cleaning, refer to
TM 9-6140-200-14.
1.
Clean battery tray (3) with sodium bicarbonate solution.
2.
Inspect battery tray (3) for damage. Replace if damaged.
3.
Inspect battery cable protectors (4) and battery compartment seals (7) for damage. Replace if damaged.
c Preventive Modification
NOTE
l The following step will prevent water from accumulating in the
battery tray.
,- ;
l Refer to hole diagram for location of holes.
Locate, mark, and drill four l/2-in. holes in battery tray (3).
d. Installation
Install battery tray (3) on battery box (5) with four washers (2), capscrews (11, washers (21, ad ~OC~XUS
03.
Tighten locknuts (6) to 6 lb-R (8 Nom).
4-130
