TM 9-2320-387-24-l
4-42. FAN CUT-OFF SWITCH REPLACEMENT
This task covers:
a. Removal
b. Installation
I
INITIAL SETUP:
TOOIS
General mechanic’s
tool kit:
automotive
(Appendix
B, Item 1)
Materials/Parts
Two locknuts
(Appendix
G, Item 116)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
l Battery ground cables disconnected (para. 4-68).
l Hood raised and secured (TM 9-2320-387-10).
Maintenance
Level
Unit
NOTE
Prior to removal, tag leads for installation.
-1
1. Disconnect harness leads 315A/315B (4) from leads 315 (5).
2.
Remove two locknuts (11, washers (21, and switch (6) from bracket (3). Discard locknuts (1).
[I
1. Install switch (6) on bracket (3) with two washers (2) and locknuts (1).
2.
Connect harness leads 315A/315B (4) to leads 315 (5).
FOLLOW-ON TASKS: l Connect battery ground cables (para. 4-68).
. Lower and secure hood (TM 9-2320-387-10).
4-69
