TM 9-2320-387-24-l
4-34. FAN TEMPERATURE SWITCH REPLACEMENT
I
This task covers:
a. Removal
INITIAL SETUP:
b. htallation
ToOlS
General mechanic’s tool hit:
automotive (Appendix B, Item 1)
Equipment Condition
l Battery ground cables disconnected (para. 4-68).
l Hood raised and secured (TM 9-2320-387-10).
MaterialsParts
Sealing compound (Appendix C, Item 61)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Maintenance Level
unit
NOTE
l The engine temperature switch is located on the top front side
of the engine in the water crossover.
l Prior to removal, tag leads for installation.
-1
1.
Disconnect engine harness leads 458A (4) and 458B (3) from fan temperature switch (1).
2.
Remove fan temperature switch (1) from water crossover (2).
b. Installation
1. Apply sealing compound to threads of fan temperature switch (1).
2.
Install fan temperature switch (1) on water crossover (2).
3.
Connect engine harness leads 458A (4) and 458B (3) to fan temperature switch (1).
FOLLCW-ON TASKS: l Connect battery ground cables (para. 4-68).
.
Lower and secure hood (TM 9-2320-387-10).
460
