4-3. ALTERNATOR/POWER STEERING MOUNTING BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
b. Installation
Remove two flanged-head capscrews (3), long flanged-head capscrew (2), and mounting bracket (1)
from engine (4).
Apply sealing compund to capscrews (2) and (3), and install mounting bracket (1) on engine (4) with
two flanged-head capscrews (3) and long flanged-head capscrew (2). Tighten capscrews (3) and (2) to
48 lb-ft (65 N•m).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealing compound (Appendix C, Item 60)
Manual References
TM 9-2320-387-24P
Equipment Condition
• Alternator removed (para. 4-5).
• Tensioner, idler pulleys, and mounting
hardware removed (para. 3-82).
• Power steering pump removed (para. 8-23).
Maintenance Level
Unit
TM 9-2320-387-24-1
4-4
Change 1
