TM 9-2320-387-24-l
r
3-83. FAN DRIVE FRICTION LINING REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-387-24P
Equipment Condition
General Safety Instructions
Prior to loosening screws on fan drive retaining
plates, disconnect fan drive hose from fan drive.
Maintenance
Level
Unit
Disconnect battery ground cables (para. 4-68).
1
a. Removal
]
WARNING
Prior to loosening screws on fan drive retaining plates, disconnect fan drive hose from
fan drive. Failure to do so may result in injury to personnel or damage to equipment.
NOTE
It may be necessary to apply compressed air to clutch adapter to disengage fan drive
clutch, allowing access to friction lining screws.
1.
Remove six screws (1) and three retaining plates (21 from fan drive (3).
2.
Remove two friction linings (4) from fan drive (3).
1.
Install two friction linings (4) on fan drive (3).
2.
Install three retaining plates (2) on fan drive (3) with six screws (1). Tighten screws (1) to 22 l&n. (2.5 Nom).
FOLLOW-ON TASK: Connect battery ground cables (para. 4-68).
3-146
