TM g-2320-387-24-1
1 2-46. STUICE-R
TEST PROCEDURES
(Cont’dl
I
BATTERY CURRENT TEST #80
Description:
This procedure measures current to or from
the battery. Test requires DCA hookup only.
Typical Applications:
Control Functions:
Evaluate batteries in Cl engines.
01(02,03,04
Test Procedure:
1. Set TEST SELECT switch to 80.
2. Press and hold TEST button until CAL
appears on display.
3. Release TEST button and wait for offset
value to appear on display. If offset is within
-150 to 150, proceed. If not, go to DCA
Troubleshooting
Procedure.
4. Press and release TEST button.
5. Observe displayed value (amps).
Pre-Test Procedures:
Run confidence test.
Possible Error Messages:
EOOS Offset not performed.
2-505
