REFERENCE INFORMATION
In order to reach these wires and the sending unit, you
have to remove the fuel tank (para. 3-25). You may want
to recheck the previous steps to be sure you didn’t miss
anything before you proceed with this step.
Replace fuel level sending unit and repair wiring
(paras. 4-32 and 4-90).
REAR OF LEFT
CYLINDER HEAD
-
FUEL LEVEL
SENDING UNIT
TM 9-2320-387-24-l
INSTRUMENTS CIRCUIT
RESISTANCE AND CONTINUITY
04,500 OHMS
STUICE-R TEST 91
I. Connect RED clip and BLACK clip to the I
indicated terminals in the question.
RED to
the first. BLACK to the second.
2. Start lest 91,0-4.500
Ohms.
3. Displayed reading is in ohms. Less than
5 ohms is continuity.
If the resistance is over
4,500 ohms, STOICE-R
displays .9.9.9.9.
CONTINUITY (RESISTANCE)
MULTIMETER
1. Set the voltmeter to an ohms scale of about
1,000 ohms.
2. Connect the RED and BLACK leads to the
connections stated in the question.
3. Be sure to read the correct scale. Less than
5 ohms indicates continuity.
For an open
circuit, the meter should peg full scale
(needle all the way to the left).
FUEL TANK
2-355
