TM 9-2320-387-24-l
REFERENCE INFORMATION
The connector is located above the driveshaft
toward the rear of the vehicle.
Repair wiring (para. 4-80).
-I
Repair wiring (para. 4-80).
RESISTANCE AND CONTINUITY
04,500 OHMS
SlWlCE-R TEST 91
I. Connect RED dip and BLACK clip to the
in&&d
terminals in the question.
RED to
the first, BLACK to the Second.
2. Start Test 91,0-4,500
Ohms.
3. Displayed reading is in ohms. Less than
5 ohms is continuity.
If the resistance is over
4,500 ohms, STEIICE-R displays .9.9.9.9.
CONTINUITY (RESISTANCE)
MULTIMETER
1. Set the voltmeter to an ohms scale of about
1,000 ohms.
2. Connect the RED and BLACK leads to the
connections stated in the question.
3. Be sure to read the correct scale. Less than
5 ohms indicates continuity.
For an open
circuit, the meter should peg full scale (needle
all the way to the left).
INSTRUMENTS CIRCUIT
REAR OF LEFT
CYLINDER HEAD
-
2-353
