TM 9-2320-387-24-l
REFERENCE INFORMATION
Remove starter motor (para. 4-l 1).
Check the pinion and gear for missing
or broken teeth, unusual wear, bent
pieces, etc.
Check tfte pinion by turning lt on the
screw shaft.
Check the armature by prying the pinion
with a screwdriver.
The armature
should turn freely.
Replace starter (para. 4-11).
Disconnect the fuel solenoid, wire 54A, to
prevent accidental starting.
Rotate the engine
with a breaker bar and socket on the crankshaft
pulley to inspect the engine flywheel for missing
or defective teeth.
-I
Replace starter (para. 4-l 1).
STARTER CIRCUIT
-.
2-259
