TM 9-2320-387-24-l
l- 11. LOCATION AND DESCRIPTION OF MAJOR
COMPONENTS
The exterior components described below are common to all vehicles covered in this manual. Special
differences are found in TM 9-2320-387-10 or table l-l, Differences Between Models, in this manual.
0 A
0 B
0 C
0 D
0 E
0 F
0 G
0 H
0 I
0 J
0 K
0 L
AIR CLEANER - Filters air before it enters intake manifold.
ENGINE - Provides power for the vehicle.
TRANSMISSION - Transmits engine power to transfer case at varying speeds.
FUEL TANK - Stores fuel.
GEARED I-IUB - Transfers turning action of halfshafts to wheels for vehicle motion.
PINTLE HOOK - Permits towing of vehicles or equipment.
REAR PROPELLER SHAFT - Transmits power from the transfer case to the rear differential.
TRANSFER CASE - Provides full-time four-wheel drive with three drive ranges.
FRONT PROPELLER SHAFT - Transmits power from the transfer case to the front differential.
MASTER CYLINDER AND HYDRO-BOOSTER
- Provides hydraulic pressure and power assist
for vehicle stopping power.
DIFFERENTIAL - Transfers turning action of the propeller shaft to the geared hubs through the
halfshafts.
WINCH - 9,000 lb electrically powered to provide recovery capability. Located in front of vehicle on
Ml113 models (if equipped) and rear of vehicle on Ml114 models (if equipped).
m
/
7i-m
A
F _- -
n
n
