TM 9-2320-387-24-l
1-7. METRIC SYSTEM
The equipment described herein contains metric components and requires metric common and special
tools; therefore, metric units in addition to standard units will be used throughout this publication.
In addition, a metric conversion table is located on the inside back cover of this publication.
l-8. MANDATORY REPLACEMENT PARTS
The maintenance instructions contained herein make reference to removing and discarding piece
parts such as: gaskets, lockwashers, cotter pins, O-rings, seals, etc.; these items should be considered
mandatory replacement items and replaced with new parts during assembly/installation.
l-9. BREAK-IN PROCEDURE
Upon receipt of vehicles, or after engine replacement, break-in procedures must be observed during the
first 500 miles (804 kilometers) of operation. For break-in procedure, refer to TM 9-2320-387-10.
Section II. EQUIPMENT DESCRIPTION AND DATA
1-l 0. EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES
The 4x4, Ml113 and Ml114 vehicles are tactical vehicles designed for use over all types of roads, as well
as cross-country terrain, in all weather conditions. The vehicles have four driving wheels powered by a
V-8, liquid-cooled, turbocharged diesel engine. Four-wheel hydraulic service brakes and a mechanical
parking brake are common to all models. Ml113 and Ml114 vehicles are equipped with a pintle hook for
towing. Tiedown and lifting eyes are provided for air, rail, or sea shipment.
1-2
