TM 9-2320-387-24-l
1 7-7. BRAKE LINES REPLACEMENT (Cont’d)
1
e. Caliper-to-Intermediate
Support Brackets Removal
NOTE
Perform steps 1 through 3 for front support bracket. Perform steps
4 through 6 for rear support bracket.
1.
Remove two tiedown straps (8) from front brake lines (4) and intermediate brake line (11).
2.
Remove two capscrews (71, washers (61, and clamps (5) from support bracket (2).
3.
Remove nut (lo), washer (91, capscrew (3), and support bracket (2) from crossmember (1).
4.
Remove capscrew (131, clamp (141, and brake line (12) from left support bracket (15).
5.
Remove capscrew (161, washer (17), and left support bracket (15) from frame bracket (18).
6.
Repeat steps 4 and 5 for right support bracket.
f. Caliper-to-Intermediate
Support Brackets Installation
NOTE
Perform steps 1 through 3 for front support bracket. Perform steps
4 through 6 for rear support bracket.
1.
Install support bracket (2) on crossmember (1) with capscrew (31, washer (91, and nut (10).
2.
Install two clamps (5) on support bracket (2) with two washers (6) and capscrews (7).
3.
Secure front brake lines (4) and intermediate brake line (11) with two tiedown straps (8).
4.
Install left support bracket (15) on frame bracket (18) with washer (17) and capscrew (16).
5.
Install brake line (12) and clamp (14) on support bracket (15) with capscrew (13).
6.
Repeat steps 4 and 5 for right support bracket.
7-22
